Miele Crystal G 5285 SCVi Operating and Installation manual - Page 18
Setting the rinse aid dosage 18, simultaneously
View all Miele Crystal G 5285 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Before using for the first time Setting the rinse aid dosage The rinse aid dosage can be set at levels between 0 and 6 ml. The factory setting is 3 ml of rinse aid. This is just a recommendation. If the dishes appear spotty: ^ Use a higher setting. If the dishes appear cloudy or streaky: ^ Use a lower setting. ^ Press the K button to turn the dishwasher off. ^ Hold down the Program button and simultaneously turn the dishwasher on using the K button. Keep the Program button pressed for at least four seconds until the lower right program indicator lights up. If it does not come on, start over. ^ Press the Turbo button three times. The Turbo indicator light flashes 3 times at short intervals. The time display shows the flashing sequence p 3. The set value is shown in the time display after the P. ^ Select the desired dosage with the Program button. Every touch of the button increases the level. The setting is saved immediately. ^ Press the K button to turn the dishwasher off. 18