Miele Crystal G 5285 SCVi Operating and Installation manual - Page 42
Frequently Asked Questions 42, Technical faults 42
View all Miele Crystal G 5285 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Frequently Asked Questions ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage. Technical faults Problem The dishwasher will not start. Possible fault The door is not properly closed. The dishwasher is not plugged in. The circuit breaker has tripped. The dishwasher stops during a program. The dishwasher is not turned on. The circuit breaker has tripped. The buzzer sounds. All the indicator lights of the program selection flash when the door is open. The time display shows fault FXX. There may be a technical fault. In addition, the drain Fault F70: pump may run even The waterproof system when the door is reports a fault. open. Solution Push the door firmly closed. Insert the plug. - Reset the circuit breaker (see data plate for the correct fuse rating). - If the circuit breaker trips again, contact Miele. Press the K button and select a program. - Reset the circuit breaker (see data plate for the correct fuse rating). - If the circuit breaker trips again, contact Miele. Press the K button to turn the dishwasher off. After a few seconds: - Turn the dishwasher on. - Use the Program button to select the desired program. - Close the door. If the indicator lights flash again, there is a technical fault. - Contact Miele, - Close the water supply. - Contact Miele. 42