Miele Crystal G 5285 SCVi Operating and Installation manual - Page 46

Poor cleaning results 46, bluish sheen on

Page 46 highlights

Frequently Asked Questions Poor cleaning results Problem Possible fault Solution The dishes are not The dishes were not loaded See "Loading the clean. correctly. dishwasher". The program was not powerful enough. Select a more intensive program (see "Program Guide"). Not enough detergent was Use more detergent, or dispensed. change the detergent. The spray arms are blocked. Turn the spray arms and rearrange the dishes if necessary. The triple filter in the wash cabinet is clogged or not correctly inserted. The spray arm jets might be clogged as a result. Clean the filter and insert it correctly. Clean the spray arm jets, if required (see "Cleaning and care"). The non-return valve is stuck Clean the drain pump and open and blocked. Wash the non-return valve (see water will run back into the "Cleaning and care"). wash cabinet. Glasses and The rinse aid dosage is set cutlery show too high. streaks. There is a bluish sheen on the surface of glasses and a film which can be wiped off. Reduce the dosage (see "Rinse aid"). 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

Poor cleaning results
Problem
Possible fault
Solution
The dishes are not
clean.
The dishes were not loaded
correctly.
See "Loading the
dishwasher".
The program was not
powerful enough.
Select a more intensive
program (see "Program
Guide").
Not enough detergent was
dispensed.
Use more detergent, or
change the detergent.
The spray arms are blocked. Turn the spray arms and
rearrange the dishes if
necessary.
The triple filter in the wash
cabinet is clogged or not
correctly inserted.
The spray arm jets might be
clogged as a result.
Clean the filter and insert it
correctly.
Clean the spray arm jets, if
required (see "Cleaning and
care").
The non-return valve is stuck
open and blocked. Wash
water will run back into the
wash cabinet.
Clean the drain pump and
the non-return valve (see
"Cleaning and care").
Glasses and
cutlery show
streaks. There is a
bluish sheen on the
surface of glasses
and a film which
can be wiped off.
The rinse aid dosage is set
too high.
Reduce the dosage (see
"Rinse aid").
Frequently Asked Questions
46