Miele Crystal G 5285 SCVi Operating and Installation manual - Page 47

and dishes., visible on cutlery

Get Miele Crystal G 5285 SCVi PDF manuals and user guides View all Miele Crystal G 5285 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Frequently Asked Questions Problem Possible fault Solution Dishes are not dry, The rinse aid setting may be Increase the dosage, refill glasses and too low, or the rinse aid the reservoir or switch the cutlery are reservoir is empty. rinse aid product when spotted. refilling (see "Rinse aid"). Dishes were taken out too Leave dishes in longer (see soon. "Use"). A "Tab" product was used. These products have a low drying effect. Change the detergent, or refill the rinse aid (see "Rinse aid"). White residue is Not enough rinse aid was Increase the dosage (see visible on cutlery used. "Setting the rinse aid and dishes. dosage"). Clouding occurs The salt container is empty. Refill the salt container (see on glassware and "Filling the salt container"). cutlery; film can be wiped off. The salt container lid was not correctly screwed on. Reseat it making sure it screws back on correctly. Unsuitable "Tab" products were used. Use a different detergent. Use normal (powder or gel) detergent. The water softener is programmed on too low a setting. Program a higher water softener setting (see "Water softener"). 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Problem
Possible fault
Solution
Dishes are not dry,
glasses and
cutlery are
spotted.
The rinse aid setting may be
too low, or the rinse aid
reservoir is empty.
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling (see "Rinse aid").
Dishes were taken out too
soon.
Leave dishes in longer (see
"Use").
A "Tab" product was used.
These products have a low
drying effect.
Change the detergent, or
refill the rinse aid (see "Rinse
aid").
White residue is
visible on cutlery
and dishes.
Clouding occurs
on glassware and
cutlery; film can be
wiped off.
Not enough rinse aid was
used.
Increase the dosage (see
"Setting the rinse aid
dosage").
The salt container is empty.
Refill the salt container (see
"Filling the salt container").
The salt container lid was not
correctly screwed on.
Reseat it making sure it
screws back on correctly.
Unsuitable "Tab" products
were used.
Use a different detergent.
Use normal (powder or gel)
detergent.
The water softener is
programmed on too low a
setting.
Program a higher water
softener setting (see "Water
softener").
Frequently Asked Questions
47