Miele Crystal G 5285 SCVi Operating and Installation manual - Page 41
Factory defaults 41
![]() |
View all Miele Crystal G 5285 SCVi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Additional options Factory defaults If you have changed any settings, you can reset them to the factory defaults. ^ Open the door. ^ Press the K button to turn the dishwasher off. ^ Press and hold the Program button and simultaneously turn the dishwasher on using the K button. Keep the Program button pressed for at least four seconds until the lower right program indicator lights up. If it does not come on, start over. ^ Press the Turbo button 12 times. The Turbo indicator shows 1 long flash and 2 short flashes in intervals. The flashing in the time display shows whether a setting is different from the default setting. - "p 1": all values are set to the default settings. - "p 0": at least one setting has been changed. ^ Press the Program button to reset the dishwasher to the factory defaults. The setting is immediately saved. ^ Press the K button to turn the dishwasher off. 41
![](/manual_guide/products/miele-crystal-g-5285-scvi-operating-installation-manual-db500dd/41.png)