Miele KF 1911 Vi Operating and Installation manual - Page 71
for the various design options of, custom doors.
View all Miele KF 1911 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Installing the appliance ^ Mark the distance X on the back-side of the custom door. ^ Also calculate and mark the center of the custom door Y. ^ Remove the mounting frame from the appliance door and position it according to the markings on the custom door. ^ Pre-drill the holes. ^ Tightly screw on the bracket using the pre-drilled holes: Attach the bracket to each attachment point with at least one screw. ^ Attach the bracket at the top with at least 10 screws. Please note: When attaching the mounting frame onto two adjacent doors (see "Front panel gap kit") screw into the thicker outer frames of the doors only. The bracket includes a variety of holes for the various design options of custom doors. When performing work on the custom door, always observe the following: - Always select the best load-bearing surface of the custom door as the location for screws. - Always select a screw length that is shorter than the thickness of the door front. ^ Secure the door handle to the front of the appliance from the inside. 71