Miele KF 1911 Vi Operating and Installation manual - Page 73
Attaching the lower bracket, hole in the custom door front.
View all Miele KF 1911 Vi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Installing the appliance Note the size of the upper custom door front: The fixing brackets are used to secure the custom door front to the bottom of the appliance door. ^ Open the appliance door all the way. ^ Slightly loosen the screw (1.). ^ Position the fixing bracket on the appliance door (2.) and pre-drill a hole in the custom door front. ^ Measure the distance Y between the adjusting rail from the lower door and the upper door. ^ Be sure to leave a distance of 1/8" (3 mm) from the upper cabinetry door. ^ Screw the fixing bracket securely to the custom door front (3.). ^ Tighten the screw (4.). ^ Put the cover on the bracket (5.). The number of lower brackets will depend on the width and the design of the custom door. Attaching the lower bracket (Only for appliances using the "Front panel gap kit".) 73