Motorola MC9094-KUCHJERA6WR User Guide - Page 93
Using a Wired Headset, Windows Mobile 5.0 Devices on Using a Headset MC9090-G Shown
View all Motorola MC9094-KUCHJERA6WR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Operating the MC909X 2 - 49 • On Windows Mobile 5.0 - Warm Boot (Soft Reset) - Resets the mobile computer. Operating system and all applications are restarted. File storage is preserved. - Cold Boot (Hard Reset) - Resets the mobile computer Operating system and all applications are restarted. File storage is preserved. Real-Time Clock (RTC) is reset. Normally only used when a Warm Boot does not initiate. NOTE Applications that are added to the Application folder are not removed when a cold boot is performed. The Application folder is in flash memory. For information about booting the mobile computer, see Windows Mobile 5.0 Devices on page 2-54. Using a Wired Headset You can use a stereo headset for audio communication when an audio enabled application is used. To use a headset, plug the headset jack into the audio connector on the side of the mobile computer. Ensure that the mobile computer's volume is set appropriately before putting the headset on. When a headset is plugged into the jack, the speakerphone is muted. For WWAN-enabled mobile computers, Symbol recommends a 2.5mm jack headset, p/n 50-11300-050. NOTE The MC9094 and MC9097 does not support headsets with buttons used to answer or hang-up a call. Use the green dot or red dot keys on the keypad. Figure 2-27 Using a Headset (MC9090-G Shown)