Motorola MC9094-KUCHJERA6WR User Guide - Page 97

Operating the MC909X 2 - 53 Figure 2-32 Pick List Mode with Multiple Bar Codes in Aiming Pattern 4. Release the trigger. NOTE Imager decoding usually occurs instantaneously. The mobile computer repeats the steps required to take a digital picture (image) of a poor or difficult bar code, as long as the trigger remains pulled. Scanning Tips Optimal scanning distance varies with bar code density and scanner optics. • Hold the scanner farther away for larger symbols. • Move the scanner closer for symbols with bars that are close together. NOTE Scanning procedures depend on the application and mobile computer configuration. An application may use different scanning procedures from the one listed above. Scan LED Indicator The Indicator LED bar on the mobile computer provides a visual indication of the scan status. Table 2-15 Scan LED Indicators LED Status Indication Off Not scanning. Solid Red Laser enabled, scanning/imaging in process. Solid Green Successful decode. Resetting the Mobile Computer Windows CE 5.0 Devices There are two reset functions, warm boot and cold boot. A warm boot restarts the mobile computer by closing all running programs. A cold boot also restarts the mobile computer, but erases all stored records and entries in RAM. Data saved in flash memory or a memory card is not lost. In addition it returns formats, preferences and other settings to the factory default settings. Perform a warm boot first. This restarts the mobile computer and saves all stored records and entries. If the mobile computer still does not respond, perform a cold boot.