Motorola i9 Sprint User Guide - Page 78

NNTN7530A_i9_Nextel_UG_Final_Draft.book Page 70 Friday, December 19, 2008 2:41 PM 2. Under Network Tasks, select Create a New Connection. When the New Connection Wizard appears, click on Next to continue. Note To get to New Connections in Classic View, from the Control Panel select Network Connections, and click on New Connection Wizard. 3. Select Connect to the Internet and click Next. 4. Select Set up my connection manually and click Next. 5. From the Internet Connection screen, select Connect Using a Dial-up Modem and click Next. Important You may be prompted to select the modem you would like to use. Make sure you choose the Standard 19200 bps modem you created earlier. 6. Name the dial-up connection and click Next. Tip It might be helpful to give this dial-up connection a name that will remind you it is a modem connection for your phone. 7. To connect via packet data, enter S = 2 as the phone number, and click Next. Important Packet Data users must be provisioned for Packet Data by their carrier. 8. Enter the user name and password for your Internet service and check the appropriate fields for connecting to your service provider (if applicable). Click Next and then Finish to complete the process. Connecting to the Internet or a Network for the First Time Before you use your phone to connect to the Internet or a network for the first time, you must disable LCP Extensions. 1. From Network Connections, select the dial-up connection you just created. 2. From the dial-up screen, click Properties. 3. Click on the Networking tab, and click on Settings. 4. Remove the checkmark from Enable LCP Extensions, and click OK. 70 5. Data Services