NEC LT240GOV User Manual - Page 103
Set your IP address. Press, IP Address
View all NEC LT240GOV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
USING ON-SCREEN MENU Ͼ Menu Descriptions & Functions Automatic ........ Automatically assigns an IP address to the projector from a DHCP server. Manual Provides a space for you to register the IP address or subnet mask number obtained from your network administrator. IP Address ...... Set your IP address. Press to display the software keyboard and type in 12 numeric characters. Subnet Mask ... Set your subnet mask number. Press to display the software keyboard and type in 12 numeric characters. Projector Name Specify a unique projector name. Press to display the software keyboard and type in. Up to 16 alphanumeric characters can be used. Gateway .......... Set the default gateway of the network connected to the projector. Press to display the software keyboard and type in 12 numeric characters. Checking this box will make the set default route valid. When data is sent from the LAN card, the transfer location will be searched according to the previously set routing information; however, when the transfer location has not been found as a result of the search, the data will be sent to the device that holds the IP address set here. The IP address that is set here must be one that can be identified by a search of the routing information. DNS Configuration Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters are used. Domain Name . Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be used. E-103