NEC LT240GOV User Manual - Page 50
Setting the function switch, Factory default]
View all NEC LT240GOV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
PROJECTING AN IMAGE Setting the function switch There are two switches on the bottom of the battery case: an applicable projector selector switch (1) and laser enable/disable switch (2). Check the projector being used and decide whether to enable or disable laser, then set these switches as necessary using the tip of a thin ballpoint pen. On this model, an applicable projector selector switch (1) is not used. OFF ON Switch (2) On: Enabled (the laser lights when the LASER button is pressed) [Factory default] Off: Disabled (the laser does not light even when the LASER button is pressed) Disable the laser when using in an environment in which the unit is accessible to children. E-50
E-50
Setting the function switch
ON
OFF
There are two switches on the bottom of
the battery case: an applicable projector
selector switch (1) and laser enable/dis-
able switch (2). Check the projector be-
ing used and decide whether to enable
or disable laser, then set these switches
as necessary using the tip of a thin ball-
point pen. On this model, an applicable
projector selector switch (1) is not used.
Switch (2)
On:
Enabled (the laser lights when the LASER button is pressed)
[Factory default]
Off:
Disabled (the laser does not light even when the LASER button
is pressed)
Disable the laser when using in an environment in which the unit is acces-
sible to children.
PROJECTING AN IMAGE