NEC MD322C8 Users Manual - Page 26
OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT
View all NEC MD322C8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Tag7 LANGUAGE*1 OSD control menus are available in nine languages. Press "LEFT" or "RIGHT" to select. OSD H.POSITION You can choose where you would like the OSD control image to appear on your screen. Selecting OSD Location allows you to manually adjust the position of the OSD control menu left or right. OSD V.POSITION You can choose where you would like the OSD control image to appear on your screen. Selecting OSD Location allows you to manually adjust the position of the OSD control menu up or down. OSD TURN OFF OSD LOCK OUT*1 The OSD control menu will stay on as long as it is use. You can select how long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are 10-120 seconds in 5 second increments. This control completely locks out access to all OSD control functions. When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD controls are locked out. There are three types of OSD LOCK OUT: OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT, then "RIGHT" button and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then "RIGHT" button and hold down simultaneously while in the OSD menu. No controls can be adjusted while in the lock out mode. OSD LOCK OUT with BRIGHTNESS and VOLUME control: To activate the OSD Lock Out function, press SELECT, then "DOWN" and "LEFT" buttons and hold down simultaneously. To deactivate the OSD Lock Out, press SELECT, then "DOWN" and "LEFT" buttons and hold down simultaneously while in the OSD menu. BRIGHTNESS and VOLUME can be adjusted while in the lock out mode. CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or DISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS & VOLUME), PICTURE MODE, WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSD Lock Out function, press RESET and EXIT to bring up the LOCK OUT warning. Press SELECT, SELECT EXIT. OSD TRANSPARENCY Adjusts the transparency of the OSD MENU. OSD COLOR*1 "Tag window frame color", "Item select color" & "Adjust Window frame color" can be changed. BOOT LOGO*1 The NEC logo is briefly displayed after the monitor is powered on. This feature can be turned on or off in the OSD. Note: If the "EXIT" button is kept pressed while NEC logo is displayed, the BOOT LOGO menu will appear. It is possible to change the BOOT LOGO setting to OFF. SIGNAL INFORMATION*1 Signal information can be displayed in the corner of the screen. Signal information is either "ON/OFF". RESOLUTION NOTIFIER*1 HOT KEY*1 FACTORY PRESET*1 If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not the optimal resolution. When this function is activated; the brightness of the monitor can be adjusted without entering the OSD menu by using the front buttons. The "LEFT" or "RIGHT" buttons adjust the brightness level. When this function is set to OFF, some buttons are disabled. See page 13. Selecting FACTORY PRESET allows you to reset all OSD control settings back to the factory settings. Highlighting the control to be reset and pressing the RESET button can reset individual settings. Tag8 VOLUME Controls the volume of the speakers or headphones when set to other than OFF in MULTI PICTURE. To mute the sound output, press the "RESET" button. SOUND INPUT Selects sound input port when set to other than OFF in MULTI PICTURE. A red frame is displayed on selected picture. NOTE: When DP EDID SOUND SELECT is OFF, DisplayPort signal will not emit any sound. AUDIO DELAY For synchronizing of sounds and images, delay the audio output timing. DP EDID SOUND SELECT When OFF is selected, DisplayPort signal will not emit any sound. You can select "OFF", when DisplayPort signals do not optimize on the native resolution. MULTI PICTURE Selects MULTI PICTURE MODE, OFF/PIP/PBP (Picture by Picture) *1 This item does not reset by FACTORY PRESET (Tag7). English-24