NEC NEC-80573 User Guide - Page 84

Section 3: Features Automatic Hyphenation in the Enhanced Last Number Redial Display The system will automatically insert hyphens in the Enhanced Last Number Redial display for the types of calls listed below. All other calls are displayed without hyphens. G NNX + xxxx calls (e.g., 926-5400) G NPA + NNX + xxxx calls (e.g., 203-926-5400) G 1 + NPA + NNX + xxxx calls (e.g., 1-203-926-5400) If the call is placed on a PBX trunk, and the PBX access code is dialed, the display shows the PBX access code, a space, followed by the dialed number using the same hyphenation as shown above (e.g., 9 1-203-926-5400). If the PBX access code is not dialed, the number is displayed without hyphens. Feature Quick Steps To redial your last call: 1. Lift the handset + (Optional) Press an idle line key to preselect a trunk + Press LND. To redial your last call using Enhanced Last Number Redial: 1. At a Super Display Telephone Press LND + Soft key for the number you want to redial. At a 22- or 34-Button Display Telephone Press LND + VOL L or VOL M to the number you want to redial + DIAL. Line Keys Availability: All versions. Press a line key for onetouch access to an outside line. A line key provides an extension user with one-button access to trunks. The extension user just presses a line key to place or answer a call on the trunk. There is no need to dial codes to access or intercept trunk calls. In addition, a line key provides a Busy Lamp Field (BLF) for the trunk to which it is assigned (see the table below). Line Key BLF Indications When the key is: The trunk is: Off Idle or not installed On (red) On (green) In use or on Exclusive Hold at a coworker's extension In use at your extension Winking on (red) On System Hold at a co-worker's extension Winking on (green) On System Hold or Exclusive Hold at your extension Flashing slowly (red) Ringing into the system 74 N Section 3: Features DS1000/2000 Product Description