NEC NP-M322X User's Manual - Page 41
(10) After Use
View all NEC NP-M322X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
❿ After Use Preparation: Make sure that the projector is turned off. 2. Projecting an Image (Basic Operation) 1. Unplug the power cord. 2. Disconnect any other cables. • Remove the USB memory if it is inserted into the projector. 3. Retract adjustable tilt foot if extended. (M402W/M362W/M322W/M402X/M362X/M322X/M282X only) 4. Slide the lens cover to the left to cover the lens. 5. Put the projector and accessories in the supplied soft case. Place the projector in the soft case with the lens facing upward as shown below. This is to prevent the lens from damage. Insert the projector with the lens facing upward NOTE: When placing the projector in the soft case, retract the tilt foot and the rear feet. Failure to do so may case damage to the projector. (M352WS/M302WS/M322XS only) 4. Reattach the lens cap 1 2 ① Put the lens cap on the top of the lens. ② Push to cover the lens completely. CAUTION: Use caution when putting the projector in the soft case immediately after the projector has been operating. The projector cabinet is hot. 30