NEC NP-P451X User's Manual - Page 109

Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. 5. Using On-Screen Menu NOTE: • The [HORIZONTAL] and [VERTICAL] items are not available for VIDEO, S-VIDEO, HDMI, VIEWER, NETWORK, and USB DIS- PLAY. • The HORIZONTAL and VERTICAL cannot be adjusted depending on the signal. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied. To delete adjustments stored in memory, from the menu, you select [RESET] → [CURRENT SIGNAL] or [ALL DATA] and reset the adjustments. Selecting Overscan Percentage [OVERSCAN] Select overscan percentage (AUTO, 0%, 5% and 10%) for signal. Projected image Overscaned by 10% NOTE: • The [0[%]] cannot be selected when VIDEO and S-VIDEO signals are used. • The [OVERSCAN] item is not available: • when [NATIVE] is selected for [ASPECT RATIO]. • when [VIEWER], [NETWORK], or [USB DISPLAY] is selected for [SOURCE] • depending on the signal • If the projector does not reflect the settings for your HDMI equipment such as a DVD player connected to the HDMI 1 IN or HDMI 2 IN connector, select the HDMI1 or HDMI2 input source again on the projector. 97