NEC PX-42VP1A 42PD1/50PD1 - Page 13
Side View, Terminal Board L/R - power supply
View all NEC PX-42VP1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Side View.... Terminal Board L/R IN OUT VIDEO S-VIDEO 15 10 HIGH 75Ω V H/CS 11 B 16 G RGB2 R 12 13 RGB1 17 14 AC-IN 18 Insert the prongs completely. * for PLUGGABLE EQUIPMENT, tee socket-outlet shall be installed near the equipment and shall be easily accessible. 10 DIP SW Sets the various modes of this unit. 15 VIDEO IN [BNC] connector (BNC): Inputs the video (composite video signal). 11 RGB3 (DVI 29pin) IN connector: Inputs a digital RGB signal. (TMDS) IN [S] connector (DIN 4 pin): Inputs the S video (Y/ C separate signal). * When connections are made to both the BNC connector Note: This connector does not support analog input. and the S video connector, the signal of the S video connector has priority. 12 REMOTE (Mini jack) IN jack: This jack connects the wired remote control. THROUGH OUT jack: Outputs as is the remote control signal that is connected to the REMOTE IN jack. * This is used when operating multiple monitors (i.e., of THROUGH OUT [BNC] connector (BNC): Outputs as is the signal that is input to the VIDEO IN [BNC] connector. THROUGH OUT [S] connector (DIN 4 pin): Outputs as is the signal that is input to the VIDEO IN [S] connector. this unit) with a single remote control. 16 RGB2 [R, G, B, H/CS, V] (BNC) 13 EXTERNAL CONTROL (mini D-Sub 15 pin) Controlled by the computer's RS-232C interface. IN connector: Used when operating this unit with EXTERNAL CONTROL from a personal computer. THROUGH OUT connector: Outputs as is the signal that is input to the EXTERNAL CONTROL IN connector. IN connector: Inputs the analog RGB signal. The H/V composite signal is connected to the H/CS connector. THROUGH OUT connector: Outputs as is the signal input to the RGB2 IN connector. 75Ω/HIGH switch: This switch selects the impedance of the connector. It is usually used in the "75Ω" position. 14 CONTROL LOCK When "CONTROL LOCK" is set to "ON", the buttons on the set's control panel do not function. 17 RGB1 (mini D-Sub 15 pin) IN connector: Inputs the analog RGB signal of a personal computer, etc. 18 AC IN connector Connects with the supplied power cable. 13