NEC PX-42VP1A 42PD1/50PD1 - Page 46
Id Select Menu
View all NEC PX-42VP1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Set Selection Screen for Allotting ID Numbers to Multiple Screens/Each Set This sets the VIDEO WALL NO. and SET ID NO. ID Selection Screen 3. Set to the desired value POSITION / CONTROL Press the EXIT button twice. Press the EXIT button once to return to the main menu. To delete the main menu, press the button once more. Numbers go DOWN Number go UP 1. Press the ID SELECT button of the remote control This displays the ID selection screen. ID SELECT * This function prevents multiple sets from being controlled at the same time when ID numbers have been set to multiple screens/multiple sets and the remote control is being used. * Only sets with ID numbers that have been set with this menu can be controlled. Note that the ID SELECT button is valid regardless of the ID. * This function is also valid when this set is controlled via the RS-232C connector. VIDEO WALL No. * The POSITION CONTROLᮤ / ᮣ buttons are used to switch the numbers from 1 through 6. * A press of the remote control CLEAR button causes a reset. (Initial value is ALL) SET ID No. * The POSITION CONTROLᮤ / ᮣ buttons are used to enter numbers from 1 through 256. Note that entry of numbers higher than 256 is not possible. * A press of the remote control CLEAR button causes a reset. (Initial value is ALL) Note: When both ID numbers have been set, the priority order will be as described below. VIDEO WALL > SET ID 2. Align the cursor with the desired item POSITION / CONTROL Move up Move down ID Selection Screen ID SELECT MENU VIDEO WALL NO : 1 SET NO : 256 4. Return to the main menu EXIT The display will go off when the EXIT button is pressed or when the DISPLAY TIME setting time has elapsed. 46