NEC PX-50XM6A 42XM5/50XM6/60XM5 UM - Page 38

Side-by-Side RGB1 Picture-in-Picture RGB1 SELECT/ FREEZE button S BY S1 RGB1 RGB1 RGB1 SELECT/ FREEZE button RGB1 or S BY S2 RGB1 RGB1 Switching the input source quickly This feature enables quick input selection. After setting ON, press the CLEAR/SEAMLESS SW button for quick switching between the two selected input signals. Example: Set to switch quickly between RGB1 and RGB2. On "SEAMLESS SW" of "OPTION4" menu, select "ON". Select "RGB1" and "RGB2". OPTION 4 PREVIOUS PAGE SUB. PICTURE ZOOM NAV : BTM LFT PIC FREEZE : S BY S1 SEAMLESS SW : ON SELECT1 : RGB1 SELECT2 : RGB2 TEXT INSERT : OFF SEL. ADJ. EXIT RETURN 4 / 4 * The available sources depend on the setting of input. Displaying the information as a text Example: Setting "TEXT INSERT" to "BOTTOM-3", "INPUT" to "RGB1", "SUB. P DETECT" to "AUTO", "PIC. RATE" to "100%" and "DISPLAY" to "NORMAL" On "TEXT INSERT" of "OPTION4" menu, select "BOTTOM-3", then press the MENU/ENTER button. The "TEXT INSERT" screen appears. Adjust the items. TEXT INSERT INPUT : RGB1 SUB. P DETECT : AUTO PIC. RATE : 100% D I S P L AY : NORMAL SEL. ADJ. EXIT RETURN Enhanced split screen Model Information Ⅵ TEXT INSERT setting OFF: Displays no text. BOTTOM-1/BOTTOM-2/BOTTOM-3/MID.LOW/ MID.HIGH/TOP-3/TOP-2/TOP-1/LEFT/RIGHT: Displays a text at the specified location, where the subscriptions -1, -2 and -3 indicate the height of the text area. Ⅵ INPUT setting Sets the input of the text to the RGB1 to 3. Ⅵ SUB. P DETECT setting AUTO: Black frame with no signal input disappears 3 seconds after the input signal is lost. OFF: Black frame with no signal input is displayed consistently. Ⅵ PIC. RATE setting Sets the transparency of the text. Ⅵ DISPLAY setting NORMAL: The sub screen is displayed consistently. FADE: The sub screen fades in. Information Ⅵ SEAMLESS SW Function * This feature will not function for certain input combinations. See the table on page En-16. * After switching to the selected input, please operate this function. * This feature will not function during split screen mode. * When SEAMLESS SW is first turned on, or when signals being transmitted are changed, there may be a slight delay due to signal analysis. Ⅵ SEAMLESS SW settings OFF: Turns off the SEAMLESS SW function. ON: When the CLEAR/SEAMLESS SW button is pressed, input signals will switch quickly according to the setting of SELECT1 and SELECT2. En-37