NEC PX-50XM6A 42XM5/50XM6/60XM5 UM - Page 44

Model Dots ‫ ן‬lines Vertical frequency Horizontal frequency Signal Type (Hz) (kHz) Work Station 1280‫ן‬1024 60.0 64.6 (EWS4800) 71.2 75.1 Work Station (HP) 1280‫ן‬1024 72.0 78.1 Work Station 1152‫ן‬900 66.0 61.8 (SUN) 76.0 71.7 1280‫ן‬1024 76.1 81.1 Work Station 1024‫ן‬768 60.0 49.7 (SGI) 1280‫ן‬1024 60.0 63.9 IDC-3000G PAL625P 768‫ן‬576 50.0 31.4 NTSC525P 640‫ן‬480 59.9 31.5 Sync Polarity Horizontal Vertical NEG NEG - - C Sync C Sync C Sync - - - - NEG NEG - - C Sync C Sync C Sync - - - - NEG NEG NEG NEG Presence Horizontal Vertical YES YES YES YES - - - - - - - - - - - - - - - - - - - - - - - - Screen mode NORMAL FULL (4:3) (16:9) YES*3 YES YES*3 YES YES*3 YES YES YES YES YES YES*3 YES YES YES*2 YES*3 YES RGB select*4 1280‫ן‬1024 1024‫ן‬768 1280‫ן‬1024 DVI YES YES YES YES YES YES YES YES TEXT INSERT Memory YES*9 29 YES*9 48 YES*9 59 YES 60 YES 61 YES*9 30 YES*9 62 YES*9 29 YES YES YES YES YES*6 YES*6 YES*6 YES*6 - - 525P NO YES*9 31 NO YES*9 32 *1 Only when using a graphic accelerator board that is capable of displaying 852‫ן‬480. *2 The picture is displayed in the original resolution. The picture will be compressed for other signals. *3 Aspect ratio is 5:4. This signal is converted to a 720 dots‫ן‬768 lines signal. *4 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above. *5 To connect the monitor to Macintosh computer, use the monitor adapter (D-Sub 15-pin) to your computer's video port. *6 Other screen modes (ZOOM and STADIUM) are available as well. *7 CVT standard compliant. *8 Analog signal is not available. *9 The text cannot be displayed at the "RIGHT" and "LEFT" location. NOTE: • While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer. • This monitor has a resolution of 1024 dots‫ן‬768 lines. It is recommended that the input signal should be XGA, wide XGA, or equivalent. • With digital input some signals are not accepted. • The sync may be disturbed when a nonstandard signal other than the aforementioned is input. • If you are connecting a composite sync signal, use the HD terminal. What is HDCP/HDCP technology? HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI). If you are unable to view material via the DVI input, this does not necessarily mean the PDP is not functioning properly. With the implementation of HDCP, there may be cases in which certain content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP community (Digital Content Protection, LLC). • "IBM PC/AT" and "XGA" are registered trademarks of International Business Machines, Inc. of the United States. • "Apple Macintosh" is a registered trademark of Apple Computer, Inc. of the United States. En-43