NEC VT695 NP115 : RS232 codes- Projectors - Page 12
NP40/NP50/NP60/NP41/NP61/NP62/NP43/NP64 and P350X/350W/420X, the term RGB connector has been
UPC - 050927253607
View all NEC VT695 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
LT30 : NP4000: NP4001: NP62 : firmware version 1.03 or later firmware version 1.04 or later firmware version 1.01 or later firmware version 1.02 or later 5. Command Descriptions Precautions with Inscriptions: (*1) Projector ID It is the value when forwarding a factory. This reflects the "Projector ID" that has been set to the projector. (*2) Model code: "xxH" inscription This will differ depending on the projector. In case of MT/NP1000 series In case of MT/NP3150 series In case of MT/NP3250 series In case of LT/LT80 series In case of NP61, NP62 series In case of NP216 series In case of VT series In case of NP600 series In case of NP610 series In case of NP2200 series In case of M300 series In case of P420 series In case of GT series In case of HT series In case of WT series In case of HT10 series In case of LT180 series In case of LT30 series In case of NP60 series In case of NP4000, 4100 series In case of NP905/NP901W/VT800 10H 10H 10H 20H 20H 20H 40H 40H 40H 40H 40H 40H 50H 60H 70H D0H D0H D0H D0H 80H 90H (*3) Checksum: "CKS" inscription This is the value of the lower 8 bits of the results calculated in byte units from all of the data up to the immediately preceding data. Example: 20H 81H 01H 60H 01H 00H 03H CKS (*4) Response error number This is the value of the error number at the time of an error. See "NAK" of "6-2. Data portion of response". (*5) Term "RGB" and "COMPUTER" On the HT1100, VT770, LT245/ LT265/ LT280/ LT380, NP1000/NP2000, NP1150/NP2150/NP3150/NP3151W, NP1250/NP2250/NP3250/NP3250W, NP1200/NP2200, NP4000/NP4001, NP4100/NP4100W, NP905/NP901W/VT800, LT25/LT30/LT35, VT48/VT480/VT580, VT49/VT490/VT590/VT595/VT695/VT700, NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S, NP310/NP410/MP410W/NP510/NP510W/NP610WS/NP610/NP610S, NP40/NP50/NP60/NP41/NP61/NP62/NP43/NP64 and P350X/350W/420X, the term "RGB connector" has been changed to "COMPUTER". (*6) Term "DVI" and "COMPUTER" On the LT380, NP1000/NP2000, NP1150/NP2150/NP3150/NP3151W, NP1250/NP2250/NP3250/NP3250W, NP1200/NP2200, NP4000/NP4001, NP4100/NP4100W, NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S,