Netgear 340U AT Command Reference - Page 10

AirCard 77Xs / 34xU AT Command Reference Table 1-3: Mobile IP configuration commands (Continued) Command Description Page $QCMIPMHSS Set/return active profile's Home Agent 'shared secret' (ASCII) 28 $QCMIPMHSSX Set/return active profile's Home Agent 'shared secret' 28 (Hexadecimal) $QCMIPNAI Set/return active profile's NAI 29 $QCMIPP Set/return the active profile 29 $QCMIPPHA Set/return active profile's primary Home Agent address 30 $QCMIPSHA Set/return active profile's secondary Home Agent address 30 $QCMIPRT Enable/disable reverse tunneling 31 $QCMIPT Display RFC 2002bis authentication state 31 SIM Commands-Commands used to communicate with an installed (U)SIM. Table 1-4: SIM commands Command Description Page !ICCID Return (U)SIM card's ICCID 34 OMA-DM Commands-Commands used to configure DM (Device Management) accounts, sessions, and host-device-server interactions. Table 1-5: OMA-DM commands Command Description Page !IDSTEST Start DM session (Sprint OMA activation) 36 Conventions The following format conventions are used in this reference: Character codes or keystrokes that are described with words or standard abbreviations are shown within angle brackets using a different font, such as for Carriage Return and for a blank space character. Numeric values are decimal unless prefixed as noted below. Hexadecimal values are shown with a prefix of 0x, i.e. in the form 0x3D. Binary values are shown with a prefix of 0b, i.e. in the form 0b00111101. Command and register syntax is noted using an alternate font: !CHAN=[,b]. The leading "AT" characters are not shown but must be included before all commands except as noted in the reference tables. 10 Proprietary and Confidential 4114487