Netgear 340U AT Command Reference - Page 14
Command reference
View all Netgear 340U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
AirCard 77Xs / 34xU AT Command Reference Command reference Table 2-2: AT command password details Command Description !ENTERCND Enable access to password-protected commands Before you can use any password-protected AT commands, you must enter the password correctly using this command. The initial password ("A710") is configured onto the modem during manufacture. You can change the password using !SETCND. Once the password has been entered correctly, the password-protected AT commands are available until the modem is reset or powered off and on. Password required: Yes-Query format only. Usage: • Execution: AT!ENTERCND= Response: OK Purpose: • Query: Response: Unlock password-protected commands. AT!ENTERCND? (if unlocked) Purpose: This command is password-protected. After entering the password correctly using the execution operation ("="), you can use this command to display the password as a reminder. Parameters: (Password stored in NV memory) • Password must be entered with quotation marks. (For example, AT!ENTERCND = "ExamplePW".) • Password length: 4-10 characters (0-9, A-Z, upper or lower case) • Characters may be entered in ASCII format, or in Hex format. (For example: "myPass3" or "ABCDEF01234".) !SETCND Set AT command password Change the password used for the !ENTERCND command. (Before you can change the password using !SETCND, you must enable access to this command using !ENTERCND.) Password required: Yes Usage: • Execution: AT!SETCND= Response: OK Purpose: Sets as the new password for accessing protected commands. Parameters: (New password) • Password must be entered with quotation marks (for example, AT!SETCND = "NewPW"). • Password length: 4-10 characters (0-9, A-Z, upper or lower case) • Characters may be entered in ASCII format, or in Hex format. (For example: "myPass3" or "ABCDEF01234".) Warning: Do NOT enter a null password (that is, the cannot be "") - you will NOT be able to use password-protected commands, and will have to contact NETGEAR for help to reset the password. 14 Proprietary and Confidential 4114487