Netgear 340U AT Command Reference - Page 16
Select/return frequency band set
View all Netgear 340U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
AirCard 77Xs / 34xU AT Command Reference Command reference Table 3-2: Modem status, customization, and reset commands Command Description !BAND Note: The 'Basic' command and response versions are used if you haven't entered the required password. (See Command access on page 7.) Select/return frequency band set Configure the modem to operate on a set of frequency bands, look up available sets, create new sets, or return the current selection. Password required: Yes-Execution (Extended) format Usage: • Execution (Basic): AT!BAND = Response: OK Purpose: Select an existing set of bands. • Execution (Extended): AT!BAND = ,"",[,,] Response: OK Purpose: • Query: Response: Create a new set of bands. AT!BAND? Index, Name[, GW Band Mask [, L Band Mask]] , [, [, ]] OK or (If the current band mask doesn't match a band set) Unknown band mask. Use AT!BAND to set band. OK Purpose: Report the current band selection. ( and may only appear in Extended responses.) • Query List: AT!BAND=? Response: Index, Name[, GW Band Mask [ L Band Mask]] , [, [, ]] ... , [, [, ]] OK Purpose: Display allowed values and descriptions of the associated band sets. (Continued on next page) 16 Proprietary and Confidential 4114487