Netgear 340U AT Command Reference - Page 39
Table 7-2, Supported 27.005 AT commands, Table 7-1, Supported ITU-T Recommendation V.250 AT commands
View all Netgear 340U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Table 7-1: Supported ITU-T Recommendation V.250 AT commands (Continued) Command Description Supported =Yes; =No S0 Set number of rings before automatically answering the call S10 Set disconnect delay after indicating the absence of data carrier S3 Set command line termination character S4 Set response formatting character S5 Set command line editing character S6 Set pause before blind dialing S7 Set number of seconds to wait for connection completion S8 Set number of seconds to wait when comma dial modifier used T Select tone dialing V Set result code format mode (Default = V1-Use numeric return codes) X Set connect result code format and call monitoring Z Set all current parameters to user-defined profile (Note: Z0 resets parameters to default ) Table 7-2: Supported 27.005 AT commands Command Description +CBM +CBMI +CDS +CDSI +CMGC +CMGD +CMGF +CMGL +CMGR +CMGS +CMGW +CMMS +CMNA Cell broadcast message directly displayed Cell broadcast message stored in memory at specified location SMS status report after sending a SMS Incoming SMS status report Send command Delete message Message format List messages Read message Send message Write message to memory More messages to send New message acknowledgement to ME/TA Supported =Yes; =No Rev 1 Sep.13 Proprietary and Confidential 39