Home » Netgear Manuals » Wireless » Netgear AC2200-Nighthawk » Manual Viewer

Netgear AC2200-Nighthawk User Manual - Page 24

Your settings are saved and that device cannot connect to the extender's WiFi network

View all Netgear AC2200-Nighthawk manuals

Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

AC2200 Nighthawk X4 WiFi Mesh Extender Your settings are saved and that device cannot connect to the extender's WiFi network. Extender Network Settings 24

Section	Page
AC2200 Nighthawk X4 WiFi Mesh Extender	1
Contents	3
1. Get to Know Your Extender	5
Front Panel and Side Panel LEDs and Buttons	6
When to Use Your Extender	7
2. Get Started	8
Use the Extender in Extender Mode	9
Place the Extender and Apply Power	9
Connect to an Existing WiFi Network	9
Use the Extender in Access Point Mode	12
Log In to Access Extender Settings	13
Run Smart Setup	14
3. Extender Network Settings	15
View Connected Devices	16
Boost Your Video Streaming With FastLane Technology	16
View WiFi Settings	17
Change the WiFi Network Name	18
Turn Off the SSID Broadcast to Create a Hidden Network	18
Disable or Enable the WiFi Radios	19
Change the WiFi Speed	20
Use WPS to Add a Computer to the Extender’s WiFi Network	21
Use WPS With the Push Button Method	21
Use WPS With the PIN Method	22
Deny Access to a Computer or WiFi Device	23
Set Up an Access Schedule	25
Change the Extender’s Device Name	26
Set Up the Extender to Use a Static IP Address	26
Use the Extender With MAC Filtering or Access Control	27
4. Monitor and Maintain the Extender	29
Change the Extender User Name and Password	30
Turn Password Protection Off and On	31
Recover a Forgotten User Name or Password	31
Automatically Adjust for Daylight Saving Time	32
Manually Set the Extender Clock	33
Back Up and Restore the Extender Configuration	33
Back Up the Configuration Settings	34
Restore the Configuration Settings	34
Return the Extender to Its Factory Settings	35
Use the Factory Reset Button to Restore Factory Settings	36
Log In to the Extender and Reset to Factory Settings	36
Update the Firmware	37
Restart the Extender Remotely	38
5. FAQs and Troubleshooting	40
FAQs	41
Find Extender’s IP Address	41
Cannot Connect to the Extender	43
Cannot Join a WiFi Network	43
A. Supplemental Information	44
Factory Default Settings	45

Match case Limit results 1 per page

Extender Network Settings

AC2200 Nighthawk X4 WiFi Mesh Extender

Your settings are saved and that device cannot connect to the extender’s WiFi network.