Netgear AC2200-Nighthawk User Manual - Page 6
Front Panel and Side Panel LEDs and Buttons - mesh extender
View all Netgear AC2200-Nighthawk manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
AC2200 Nighthawk X4 WiFi Mesh Extender Front Panel and Side Panel LEDs and Buttons The LEDs are located on the front panel. A switch, buttons, and an Ethernet port are located on the side panel. Router Arrow LED Router Link LED Factory Reset button Power On/Off button WPS button Access Point/ Extender switch Client Arrow LED Client Link LED Power LED WPS LED Figure 1. Extender front panel and side panel Table 1. LEDs Ethernet port (on the bottom) LED Router Link Client Link Power WPS Description This LED indicates the connection between the extender and the router or access point. • Solid green. Best connection. • Solid amber. Good connection. • Solid red. Poor connection. • Off. No connection. This LED indicates the connection between the extender and a computer or mobile device. • Solid green. Best connection. • Solid amber. Good connection. • Solid red. Poor connection. • Off. No connection. • Solid amber. The extender is booting. • Solid green. The extender is powered on. • Off. The extender is powered off. • Solid green. WiFi security is enabled (WPA or WPA2). • Blinking green. The extender is making a WPS connection. • Off. WiFi security is not enabled. Get to Know Your Extender 6