Netgear DG834G DG834Gv3 Reference Manual - Page 124
VPN Status, Connect, Client-to-Gateway Configuration, Start
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G 3. Click on VPN Status (Figure 7-29) to get the Current VPN Tunnels (SAs) screen (Figure 7-30). Click on Connect for the VPN tunnel you want to activate. Figure 7-30 Activate the VPN Tunnel by Pinging the Remote Endpoint Note: This section uses 192.168.3.1 for an example remote endpoint LAN IP address. To activate the VPN tunnel by pinging the remote endpoint (e.g., 192.168.3.1), do the following steps depending on whether your configuration is client-to-gateway or gateway-to-gateway: • Client-to-Gateway Configuration-to check the VPN Connection, you can initiate a request from the remote PC to the DG834G v3's network by using the "Connect" option in the NETGEAR ProSafe menu bar. The NETGEAR ProSafe client will report the results of the attempt to connect. Since the remote PC has a dynamically assigned WAN IP address, it must initiate the request. To perform a ping test using our example, start from the remote PC: a. Establish an Internet connection from the PC. b. On the Windows taskbar, click the Start button, and then click Run. c. Type ping -t 192.168.3.1 and then click OK. 7-30 v1.0, January 2006 Virtual Private Networking