Netgear DG834G DG834Gv3 Reference Manual - Page 170
Configuration Summary (Telecommuter Example)
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G Configuration Summary (Telecommuter Example) The configuration in this document follows the addressing and configuration mechanics defined by the VPN Consortium. Gather all the necessary information before you begin the configuration process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions. Table B-3. Configuration summary (telecommuter example) VPN Consortium Scenario: Type of VPN: Security Scheme: IP Addressing: Gateway Client Scenario 1 PC/client-to-gateway, with client behind NAT router IKE with Preshared Secret/Key (not Certificate-based) Fully Qualified Domain Name (FQDN) Dynamic 192.168.0.1/24 Telecommuter Example LAN IP 192.168.0.1 Gateway A WAN IP FQDN ntgr.dyndns.org "fromDG834G.com" Router (at employer's main office) Client B WAN IP NAT Router B 0.0.0.0 "toDG834G.com" 192.168.2.3 Router (at telecommuter's home office) PC (running NETGEAR ProSafe VPN Client) Figure B-12 Setting Up the Client-to-Gateway VPN Configuration (Telecommuter Example) Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN Client and a network gateway involves the following two steps: • Step 1: Configuring the Client-to-Gateway VPN Tunnel on the VPN Router at the Employer's Main Office. B-14 v1.0, January 2006 NETGEAR VPN Configuration