Netgear DG834G DG834Gv3 Reference Manual - Page 35
Setup Access, Turn Access Control On, Apply, From the Wireless Settings menu
UPC - 606449029918
View all Netgear DG834G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Reference Manual for the ADSL Modem Wireless Router DG834G 2. From the Wireless Settings menu, Wireless Station Access List section, click the Setup Access List button to display the list, shown below: Figure 3-4 3. Select the Turn Access Control On check box to enable restricting wireless computers by their MAC addresses. 4. If the wireless station is currently connected to the network, you can select it from the Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations list. 5. If the wireless station is not currently connected, you can enter its address manually. Enter the MAC address of the authorized computer. The MAC address is usually printed on the wireless card, or it may appear in the modem router's DHCP table. The MAC address will be 12 hexadecimal digits. Click Add to add your entry. You can add several stations to the list, but the entries will be discarded if you do not click Apply. Wireless Configuration 3-9 v1.0, January 2006