Netgear EX3800 Installation Guide - Page 5
Use the Extender in Extender Mode - setup
View all Netgear EX3800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Use the Extender in Extender Mode In extender mode, the extender repeats the signals from an existing WiFi router or access point. Place the extender, apply power, and connect it to your WiFi network. Place the Extender and Apply Power 1. Place your extender in the same room as your WiFi router. Proximity to the WiFi router is required only during the initial setup process. 2. Plug the extender into an electrical outlet. Wait for the Power LED to light green. 3. If the Power LED does not light, press the Power On/Off button on the extender. Connect to an Existing WiFi Network To extend the range of your WiFi network, you must connect the extender to your existing WiFi network. You can do this in one of two ways: • Connect with WPS. For more information, see Connect with WPS on page 6. • Connect with web browser setup. For more information, see Connect with Web Browser Setup on page 9. 5