Netgear FVS124G FVS124G Reference Manual - Page 141

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports - After a PC has finished using a Port Triggering application, there is a time-out period before the application can be used by another PC. This is required because the firewall cannot be sure when the application has terminated. See "Port Triggering" on page 6-28 for the procedure on how to use this feature. VPN Tunnels The VPN firewall permits up to 200 VPN tunnels at a time. Each tunnel requires extensive processing for encryption and authentication. See Chapter 7, "Virtual Private Networking" for the procedure on how to use this feature. Using QoS to Shift the Traffic Mix The QoS priority settings determine the priority and, in turn, the quality of service for the traffic passing through the firewall. The QoS is set individually for each service. • You can accept the default priority defined by the service itself by observing its QoS setting. • You can override its default setting to give the service higher or lower priority than it otherwise would have. You will not change the WAN bandwidth used by changing any QoS priority settings. But you will change the mix of traffic through the WAN ports by granting some services a higher priority than others. The quality of a service is impacted by its QoS setting, however. See "Quality of Service (QoS) Priorities" on page 6-18 for the procedure on how to use this feature. Tools for Traffic Management The FVS124G ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports includes several tools that can be used to monitor the traffic conditions of the firewall and control who has access to the Internet and the types of traffic they are allowed to have. See "Monitoring" on page 8-14 for a discussion of the tools. Router and Network Management 8-7 202-10085-01, March 2005