Netgear FVS124G FVS124G Reference Manual - Page 84
Inbound Rule Example: Allowing Videoconference from Restricted Addresses - prosafe firmware
UPC - 606449040531
View all Netgear FVS124G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports Inbound Rule Example: Allowing Videoconference from Restricted Addresses If you want to allow incoming videoconferencing to be initiated from a restricted range of outside IP addresses, such as from a branch office, you can create an inbound rule. In the example shown in Figure 6-4, CU-SeeMe connections are allowed only from a specified range of external IP addresses. Figure 6-4: Rule example: videoconference from restricted addresses Inbound Rule Example: One-to-One NAT Mapping This application note describes how to configure multi-NAT to support multiple public IP addresses on one WAN interface of a NETGEAR FVS124G ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports. By creating an inbound rule, we will configure the firewall to host an additional public IP addresses and associate this address with a web server on the LAN. This procedure was developed and tested using: • Netgear FVS124G VPN Firewall with version 1.0 firmware - WAN1 IP address is 10.1.0.118 6-8 Firewall Protection and Content Filtering 202-10085-01, March 2005