Netgear FVX538 FVX538 Reference Manual - Page 25
Table 2-1., Object Descriptions, continued, Object, Activity, Description - reset factory default
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Reference Manual for the ProSafe VPN Firewall 200 FVX538 Table 2-1. Object Descriptions (continued) Object Activity Description WAN Ports and LEDs Two RJ-45 WAN ports N-way automatic speed negotiation, Auto MDI/MDIX. Link/Act LED On (Green) Blinking (Green) Off The WAN port has detected a link with a connected Ethernet device. Data is being transmitted or received by the WAN port. The WAN port has no link. 100 LED On (Green) Off The WAN port is operating at 100 Mbps. The WAN port is operating at 10 Mbps. Active LED On (Green) On (Amber) Off The WAN port has a valid Internet connection. The Internet connection is down or not being used. The WAN port is either not enabled or has no link. LAN Ports and LEDs 8-port RJ-45 10/100 Mbps Fast Ethernet Switch N-way automatic speed negotiation, auto MDI/MDIX. Link/Act LED On (Green) Blinking (Green) Off The LAN port has detected a link with a connected Ethernet device. Data is being transmitted or received by the LAN port. The LAN port has no link. 100 LED On (Green) Off The LAN port is operating at 100 Mbps. The LAN port is operating at 10 Mbps. DMZ (port 8) On (Green) Off Port 8 is operating as a dedicated hardware DMZ port. Port 8 is operating as a normal LAN port. Gigabit Port and LEDs Gbit RJ-45 connector Link/Act LED On (Green) Blinking (Green) Off Port for connecting to a gigabit Ethernet device. The LAN port has detected a link with a connected Ethernet device. Data is being transmitted or received by the LAN port. The LAN port has no link. Speed LED On (Green) On (Amber) Off The LAN port is operating at 1,000 Mbps. The LAN port is operating at 100 Mbps. The LAN port is operating at 10 Mbps. Console Port DB9 male connector Port for connecting to an optional console terminal. Default baud rate is 115.2K; pinouts: (2) Tx, (3) Rx, (5) and (7) Gnd. Factory - Defaults Factory Defaults reset push button (see "Default Factory Settings" on page 2-10 for the factory defaults). Introduction 2-7 January 2005