Netgear FVX538 FVX538 Reference Manual - Page 61
Load Balancing (and Protocol Binding) Setup, Getting E-Mail Notifications of Event
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Reference Manual for the ProSafe VPN Firewall 200 FVX538 • Test Period-DNS query is sent periodically after every test period. The minimum test period is 30 seconds. • Maximum Failures-The WAN interface is considered down after the configured number of DNS queries have failed to elicit a DNS reply from the configured DNS server. The minimum number of failed DNS queries is four. The rollover link is brought up after this. The minimum time to roll over after the primary WAN interface fails is two minutes (i.e., 30 second minimum test period times a minimum of four tests). 2. Once a rollover occurs, an alert will be generated (see "Getting E-Mail Notifications of Event Logs and Alerts" on page 6-30). You should then get the failed WAN interface restored and then force traffic back on the original primary WAN interface by reapplying the WAN Mode menu shown in Figure 4-6. Load Balancing (and Protocol Binding) Setup Perform the following steps to configure the dual WAN ports for load balancing and protocol binding on outbound traffic: 1. Select Load Balancing on the screen shown in Figure 4-6 to invoke the WAN Mode Load Balancing screen shown in Figure 4-7. Connecting the FVX538 to the Internet January 2005 4-17