Netgear FVX538 FVX538 Reference Manual - Page 89
Inbound Rule Example: Exposed Host, <IP_address>
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Reference Manual for the ProSafe VPN Firewall 200 FVX538 Figure 6-6: Rule example: one-to-one NAT mapping on inbound services To test the connection from a PC on the Internet, type http://, where is the public IP address you have mapped to your web server. You should see the home page of your web server. Inbound Rule Example: Exposed Host Specifying an exposed host allows you to set up a computer or server that is available to anyone on the Internet for services that you haven't defined. To expose one of the PCs on your LAN or DMZ as this host, do the following (see Figure 6-7): 1. Create an inbound rule that allows all protocols. 2. Place the rule below all other inbound rules. Firewall Protection and Content Filtering January 2005 6-11
Reference Manual for the ProSafe VPN Firewall 200 FVX538
Firewall Protection and Content Filtering
6-11
January 2005
Figure 6-6:
Rule example: one-to-one NAT mapping on inbound services
To test the connection from a PC on the Internet, type
http://
<IP_address>
, where
<IP_address>
is the public IP address you have mapped to your web server. You should see the home page of
your web server.
Inbound Rule Example: Exposed Host
Specifying an exposed host allows you to set up a computer or server that is available to anyone on
the Internet for services that you haven't defined. To expose one of the PCs on your LAN or DMZ
as this host, do the following (see
Figure 6-7
):
1.
Create an inbound rule that allows all protocols.
2.
Place the rule below all other inbound rules.