Netgear FVX538 FVX538 Reference Manual - Page 54
Click Setup Wizard on the WAN1 ISP Settings screen to get the Setup Wizard WAN1 - pptp
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Reference Manual for the ProSafe VPN Firewall 200 FVX538 b. Click Setup Wizard on the WAN1 ISP Settings screen to get the Setup Wizard (WAN1) screen. c. Click Next and follow the steps in the WAN1 Setup Wizard for inputting the configuration parameters from your ISP1 to connect to the Internet. Note: If you choose not to use the Setup Wizard, you can manually configure your Internet connection settings by following the procedure "Manually Configuring Your Internet Connection" on page 4-12. Unless your ISP automatically assigns your configuration automatically via DHCP, you will need the configuration parameters from your ISP as you recorded them previously in "Record Your Internet Connection Information" on page 4-5. d. When the firewall successfully detects an active Internet service, the firewall's Internet LED goes on. The Setup Wizard reports which connection type it discovered, and displays the appropriate configuration menu. If the Setup Wizard finds no connection, you will be prompted to check the physical connection between your firewall and the cable or DSL line. The options are: Table 4-1. Internet connection methods Connection Method PPPoE PPTP DHCP (Dynamic IP) Fixed IP Data Required Login (Username, Password). Login (Username, Password), Local IP, and PPTP Server IP. No data is required. IP address and related data supplied by your ISP. e. Set up the traffic meter for ISP1 if desired. See "Programming the Traffic Meter (if Desired)" on page 4-13. Note: At this point of the configuration process, you are now connected to the Internet through WAN port 1. But you must complete the configuration process outlined in this chapter to get the complete functionality of the dual WAN interface. 4-10 January 2005 Connecting the FVX538 to the Internet