Netgear FVX538 FVX538 Reference Manual - Page 86
Inbound Rule Example: Allowing Videoconference from Restricted Addresses
![]() |
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Reference Manual for the ProSafe VPN Firewall 200 FVX538 Inbound Rule Example: Allowing Videoconference from Restricted Addresses If you want to allow incoming videoconferencing to be initiated from a restricted range of outside IP addresses, such as from a branch office, you can create an inbound rule. In the example shown in Figure 6-4, CU-SeeMe connections are allowed only from a specified range of external IP addresses. Figure 6-4: Rule example: videoconference from restricted addresses Inbound Rule Example: One-to-One NAT Mapping This application note describes how to configure multi-NAT to support multiple public IP addresses on one WAN interface of a NETGEAR FVX538 ProSafe VPN Firewall 200. By creating an inbound rule, we will configure the firewall to host an additional public IP addresses and associate this address with a web server on the LAN. This procedure was developed and tested using: • Netgear FVX538 ProSafe VPN Firewall with version 1.6.12 firmware - WAN1 IP address is 10.1.0.118 6-8 Firewall Protection and Content Filtering January 2005
![](/manual_guide/products/netgear-fvx538-fvx538-reference-manual-2-a14e4ce/86.png)