Netgear GS110TP-100NAS GS110TP Hardware Installation Guide - Page 12

GS110TP Hardware Installation Guide • Power and Status LED • PoE Max LED Figure 2-2 illustrates the NETGEAR GS110TP Smart PoE Switch back panel. Power Connector Figure 2-2 The back panel contains the following: • A DC input for the supplied 48V/1.25A external power adapter LED Designations Port LEDs The following table describes the RJ-45 and SFP port LED designations. There are two LEDs for each RJ-45 port. Each SFP port has its own indication LED. Table 2-1. Port LEDs LED Speed/Link/Activity (Left LED on each RJ-45 port) Designation • Off = No link is established on the port. • Solid Green = A valid 1000 Mbps link is established on the port. • Flashing Green = Packet transmission or reception is occurring on the port at 1000 Mbps. • Solid Yellow = A valid 10/100 Mbps link is established on the port. • Flashing Yellow = Packet transmission or reception is occurring on the port at 10/100 Mbps. 2-2 Physical Description v1.0, March 2010