Netgear GS110TP-100NAS GS110TP Hardware Installation Guide - Page 8
Features, Eight RJ-45 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports. - sfp
View all Netgear GS110TP-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
GS110TP Hardware Installation Guide The GS110TP Smart PoE Switch is a free-standing switch. It is IEEE-compliant and offers low latency for high-speed networking. All ports can automatically negotiate to the highest speed. This capability makes the switch ideal for environments that have a mix of Ethernet, Fast Ethernet, or Gigabit Ethernet devices. In addition, all RJ-45 ports operate in half-duplex or full-duplex mode. The maximum segment length is 328 feet (100 meters) over Category 5 Unshielded Twisted-Pair (UTP) cable. Features The following list identifies the key features of the GS110TP Smart PoE Switch: • Eight RJ-45 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports. • Two 1000M SFP Gigabit Ethernet switching ports. • Full NETGEAR Smart Switch functionality. • Full compatibility with IEEE standards: • IEEE 802.3 CSMA/CD • IEEE 802.3i (10BASE-T) • IEEE 802.3u (100BASE-TX) • IEEE 802.3x (Full-duplex flow control) • IEEE 802.3ab (1000BASE-T) • IEEE 802.3z (1000BASE-x) • IEEE 802.3af (DTE power via MDI) • Autosensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss and frame drops. • Half-duplex backpressure control. • Per port LEDs, power LED. 1-2 Introduction v1.0, March 2010