Netgear GS716Tv2 GS716Tv2/GS724Tv3 Hardware manual - Page 13

GS716T/GS724T Hardware Installation Guide • System LEDs Figure 2-4 illustrates the NETGEAR GS724T Smart Switch back panel: Figure 2-4 100-240V ~ 50-60Hz RS-232 Power Connector The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord. LED Designations Port LEDs The following table describes the port LED designations. Table 2-1. Port LEDs Port 16/24-10/100/1000 Mbps Ports - 3 LEDs per port LED LINK/ACT SPD FDX Designation • Solid Green - A valid 1000 Mbps link is established on the port. • Flashing Green - Packet transmission or reception is occurring on the port at 1000 Mbps. • Solid Yellow - A valid 10/100 Mbps link is established on the port. • Flashing Yellow - Packet transmission or reception is occurring on the port at 10/ 100 Mbps. • Off - No 10/100 Mbps link is established on the port. • Solid Green - Full-duplex link is established on the port. • Off - No full-duplex or half-duplex link is established on the port. Physical Description 2-7 v1.0, June 2009