Netgear GS724AT GS724AT Hardware manual - Page 13

Switch Features GS700AT Hardware Installation Guide The following list identifies the key features of the NETGEAR Smart Switch. • 24 RJ-45 ports10/100/1000M auto sensing Gigabit Ethernet switching ports, four of which are Combo ports. • 48 RJ-45 ports 10/100/1000M auto sensing Gigabit Ethernet switching ports, four of which are Combo ports. • Four Small Form-factor Pluggable (SFP) GBIC slots, which function as combo ports. Combo ports are single ports with two physical connections, SFP fiber and RJ-45 copper. The RJ-45 copper ports corresponding to the Combo ports are the four 10/100/1000M auto-sensing Giga switching ports on each device. The following SFP types are supported: • 1000Base-SX • 1000Base-LX • The device support full Netgear Smart Switch functionality. • The device provide full compatibility with IEEE standards: • IEEE 802.3i, (10Base-T) • IEEE 802.3u (100Base-TX, 100Base-FX) • IEEE 802.3x (Full-duplex flow control) • IEEE 802.3ab (1000Base-T) • IEEE 802.3z (1000Base-X) • IEEE 802.3af (DTE Power via MDI) • Auto-sensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address-learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses. • Full- and half-duplex functions for all 10/100/1000 Mbps ports. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. Introduction v1.0, January 2008 1-15