Netgear GS728TPP GS728TP/GS728TPP/GS752TP Hardware Installation Guide - Page 12
GS728TPP Front Panel and Back Panel Configuration - factory reset
View all Netgear GS728TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch • Recessed Factory Defaults button to restore the device back to the factory defaults. • Select button to change the working mode of the port LEDs with either PoE mode or Ethernet mode. • Port Status and Port Speed LEDs. • Power, Fan Status, Max PoE, and LED Mode LEDs. Figure 5 illustrates the NETGEAR GS728TPP Gigabit Smart Switch back panel. Figure 5. Back panel The back panel contains a power connector. Power connector GS728TPP Front Panel and Back Panel Configuration The GS728TPP Gigabit Smart Switch has 24 10/100/1000 Mbps copper ports and four dedicated 100/1000 Mbps SFP fiber ports. Each port is capable of sensing the line speed and negotiating the duplex mode with the link partner automatically. Figure 6 illustrates the front panel of the GS728TPP Gigabit Smart Switch. Power, Fan, PoE Max, and LED Mode LEDs Link/ACT LEDs SFP ports Factory Defaults button Reset button Figure 6. Front panel 12