Netgear GS748Tv2 GS748Tv3 User Manual - Page 16
Network without DHCP Server, Configuring the Network Interface Card NIC settings on the host PC.
View all Netgear GS748Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Smart Switch Software User Manual GS748T 6. Make a note of the displayed IP address assigned by the DHCP server. You will need this value to access the switch directly from a web browser (without using Smartwizard Discovery). 7. Select your switch by clicking on the line that displays the switch address. Then click Web Access. The discovery utility displays a login window similar to the following: Figure 2-2 8. Enter the default password which is password. Then, use your web browser to manage your switch. Network without DHCP Server This section describes how to set up your switch in a network without a DHCP server, and is divided into the following tasks: • Manually assigning network parameters for your switch. • Configuring the Network Interface Card (NIC) settings on the host PC. • Logging into the web-based switch management utility. 2-2 Using the Smartwizard Discovery Utility v1.0, October 2007