Netgear GS748Tv2 GS748Tv3 User Manual - Page 29

From the main menu, Maintenance > Reset > Factory Default. The Factory Default screen will

Get Netgear GS748Tv2 - Gigabit Smart Switch PDF manuals and user guides View all Netgear GS748Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Smart Switch Software User Manual GS748T • You want to make a major configuration change for another reason. Warning: Restoring Factory Defaults erases any prior user configuration. You can perform a Factory Reset using either of the following methods: • From the main menu, Maintenance > Reset > Factory Default. The Factory Default screen will display. • Select the Check this box and click Apply below to reboot and return all configuration settings to default values check box and then click Apply, or • Press the Factory Defaults button on the right-hand side of the front panel. The effect of each of these alternatives is identical. Performing a Device Reboot restarts the system. Your configuration settings remain intact. You can reboot the switch externally by either: • Power cycle it by disconnecting and reconnecting the power cord, or • Use the Reset button on the left-hand side of the front panel. This operation does not disturb your switch configuration. To reboot the switch from the switch GUI: 1. Select Maintenance > Reset > Device Reboot. The Device Reboot screen will display. 2. Select the Check this box and click APPLY below to reboot unit checkbox. 3. Click Apply. Figure 3-7 Basic Web Management 3-7 v1.0, October 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Smart Switch Software User Manual GS748T
Basic Web Management
3-7
v1.0, October 2007
•
You want to make a major configuration change for another reason.
You can perform a Factory Reset using either of the following methods:
•
From the main menu, Maintenance > Reset > Factory Default. The Factory Default screen will
display.
•
Select the
Check this box and click Apply below to reboot and return all configuration
settings to default values
check box and then click
Apply,
or
•
Press the Factory Defaults button on the right-hand side of the front panel.
The effect of each of these alternatives is identical.
Performing a Device Reboot restarts the system. Your configuration settings remain intact. You
can reboot the switch externally by either:
•
Power cycle it by disconnecting and reconnecting the power cord, or
•
Use the Reset button on the left-hand side of the front panel.
This operation does not disturb your switch configuration.
To reboot the switch from the switch GUI:
1.
Select Maintenance > Reset > Device Reboot. The Device Reboot screen will display.
2.
Select the
Check this box and click APPLY below to reboot unit
checkbox.
3.
Click
Apply
.
Warning:
Restoring Factory Defaults erases any prior user configuration.
Figure 3-7