Netgear GS752TP GS728TP/GS728TPP/GS752TP Hardware Installation Guide - Page 10
GS752TP Front Panel and Back Panel Configuration - poe not working
View all Netgear GS752TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch GS752TP Front Panel and Back Panel Configuration The GS752TP Gigabit Smart Switch has 48 10/100/1000 Mbps copper ports and four dedicated 100/1000 Mbps SFP fiber ports. Each port is capable of sensing the line speed and negotiating the duplex mode with the link partner automatically. Figure 2 illustrates the front panel of the GS752TP Gigabit Smart Switch. Power, Fan, PoE Max, and LED Mode LEDs Link/ACT LEDs SFP ports Factory Defaults button Reset button Figure 2. Front panel The front panel contains the following: • 48 RJ-45 connectors for 10/100/1000 Mbps AutoSensing Gigabit Ethernet switching ports. • Ports 1-8 are PoE+ (30W) capable; ports 9-48 are PoE (15.4W) capable. • Four dedicated 100M/1000 Mbps SFP Gigabit Ethernet switching ports. • Reset button to restart the device. • Recessed Factory Defaults button to restore the device back to the factory defaults. • Select button to change the working mode of the port LEDs with either PoE mode or Ethernet mode. • Port Status and Port Speed LEDs. • Power, Fan Status, Max PoE, and LED Mode LEDs. 10