Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 19
FAN Status, Temperature Status, Device Status, possible values: OK, Failure, Not Applicable NA.
View all Netgear GSM5212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Web Management User Guide FAN Status The screen shows the status of the fans in all units. These fans remove the heat generated by the power, CPU and other chipsets, make chipsets work normally. Fan status has three possible values: OK, Failure, Not Applicable (NA). The following table describes the Fan Status information. Field Description UNIT ID The unit identifier is assigned to the switch which the fan belongs to. FAN The working status of the fan in each unit. Click REFRESH to refresh the system information of the switch. Temperature Status The screen shows the current temperature of the CPU and MACs. The temperature is instant and can be refreshed when the REFRESH button is pressed. The maximum temperature of CPU and MACs depends on the actual hardware. The following table describes the Temperature Status information. Field Description CPU The current temperature of the CPU in the switch. MAC The current temperature of the MACs in the switch. Click REFRESH to refresh the system information of the switch. Device Status The screen shows the software version of each device. The following table describes the Device Status information. Field Firmware Version Boot Version CPLD Version Description The release.version.maintenance.build number of the code currently running on the switch. For example, if the release was 8, the version was 0, the maintenance number was 3, and the build number was 11, the format would be '8.0.3.11'. The version of the boot code which is in the flash memory to load the firmware into the memory. The version of the software for CPLD. 19