Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 338
Device Reboot, Factory Default, Maintenance, Reset, Reboot Unit No, Save prior to reboot, APPLY
View all Netgear GSM5212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 338 highlights
Web Management User Guide Device Reboot Use the Device Reboot page to reboot ProSafe® Managed Switches. To access the Device Reboot page, click Maintenance Reset Device Reboot. To reboot the switch: 1. Use Reboot Unit No to select the unit to reset. Select all to run reset for all units. 2. Select the Save prior to reboot radio button and click the APPLY button to reboot the switch. Prior to reboot the unit, the current configuration will be saved first. 3. Select the Don't save prior to reboot radio button and click the APPLY button to reboot the switch. This option permits the user to reboot the unit without saving the current configuration. Factory Default Use the Factory Default page to reset the system configuration to the factory default values. Note: If you reset the switch to the default configuration, the IP address is reset to 169.254.100.100, and the DHCP client is enabled. If you lose network connectivity after you reset the switch to the factory defaults, see Web Access on page 11. To access the Factory Defaults page, click Maintenance Reset Factory Default. To reset the switch to the factory default settings: 338