Netgear GSM5212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 300
IP Precedence, IP TOS, DELETE, CANCEL, Rule ID, Security, ACL> Advanced, IPv6 ACL
View all Netgear GSM5212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
Web Management User Guide possibly selection one of the DSCP keyword from a dropdown box. If a value is to be selected by specifying its numeric value, then select the 'Other' option in the dropdown box and a text box will appear where the numeric value of the DSCP can be entered. • IP Precedence - The IP Precedence field in a packet is defined as the high-order three bits of the Service Type octet in the IP header. This is an optional configuration. Enter an integer from 0 to 7. • IP TOS - The IP TOS field in a packet is defined as all eight bits of the Service Type octet in the IP header. The TOS Bits value is a hexadecimal number from 00 to FF. The TOS Mask value is a hexadecimal number from 00 to FF. The TOS Mask denotes the bit positions in the TOS Bits value that are used for comparison against the IP TOS field in a packet. For example, to check for an IP TOS value having bits 7 and 5 set and bit 1 clear, where bit 7 is most significant, use a TOS Bits value of 0xA0 and a TOS Mask of 0xFF. This is an optional configuration. 3. To delete an IP ACL rule, select the check box associated with the rule, and then click DELETE. 4. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. To modify an existing IP Extended ACL rule, click the Rule ID. The number is a hyperlink to the Extended ACL Rule Configuration page. IPv6 ACL An IP ACL consists of a set of rules which are matched sequentially against a packet. When a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken and the additional rules are not checked for a match. On this menu the interfaces to which an IP ACL applies must be specified, as well as whether it applies to inbound or outbound traffic. Rules for the IP ACL are specified/created using the IP ACL Rule Configuration menu. To display the IPv6 ACL page, click Security ACL> Advanced IPv6 ACL. 1. IP ACL is the IP ACL ID or IP ACL Name which is dependent on the IP ACL Type. IP ACL ID must be an integer from 1 to 99 for an IP basic ACL and from 100 to 199 for an 300