Netgear GSM7224P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 198

Web Management User Guide ingress of an untrusted port are directed to a specific CoS queue on the appropriate egress port(s), in accordance with the configured default priority of the ingress port. This process is also used for cases where a trusted port mapping is unable to be honored, such as when a non-IP packet arrives at a port configured to trust the IP DSCP value. To configure global CoS settings: 1. Use Global to specify all CoS configurable interfaces. The option "Global" represents the most recent global configuration settings. 2. Use Interface to specify CoS configuration settings based per-interface. 3. Use Global Trust Mode to specify whether to trust a particular packet marking at ingress. Global Trust Mode can only be one of the following. Default value is trust dot1p. • untrusted • trust dot1p • trust ip-dscp 4. Use Interface Trust Mode to specify whether to trust a particular packet marking at ingress. Interface Trust Mode can only be one of the following. Default value is untrusted. • untrusted • trust dot1p • trust ip-dscp 5. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 6. If you change any of the settings on the page, click APPLY to send the updated configuration to the switch. 198